Dura Grip - High Performance Non-Slip Epoxy Paint
Dura Grip High-Performance Non-Slip Epoxy Paint is an anti-slip surface coating specifically designed to provide a UV resistant highly durable, barefoot-friendly textured paint finish on a variety of substrates. Dura Grip non-slip paint is easy to maintain and ideal for use on diamond-plate, metal ramps, garages, boats, decks, trailers, stairs, locker rooms, pools, laundry rooms and other residential or commercial areas where anti-slip protection is desired. It can be used to seal unwanted leaks in floors or grout. Other benefits will prevent salt and corrosion on metal and other surfaces.
Dura Grip anti-slip paint coatings are designed to prevent slip and falls in your home and business. Built to last, Dura Grip is an extremely tough and durable paint that can be used on multiple types of surfaces including steel, fiberglass, aluminum, concrete, asphalt, painted surfaces, wood, sports courts, and wood decks. It’s perfect for both indoors or outdoor commercial or residential areas and you can walk comfortably on Dura Grip even with bare feet.
Dura Grip anti-slip textured paint is available in an assortment of colors including black, clear, dark brown, light gray, medium gray, safety blue, safety yellow, safety red, sand, and white.
Primer - Coating Metal, Concrete or Wood? Primer is recommended! Purchase your primer with a roller. Click here to purchase Dura Grip primer
Garage Floors - Dura Grip is highly recommended for garage floors. Use two coats and allow dry time of 36 hours. For best adhesion, we recommend adding the adhesion promoter - 1 x bottle per gallon of Dura Grip.
Boats - Dura Grip is an exceptional fiberglass boat coating on metal and fiberglass. Dura Grip offers slip resistance with a great look and feel. Substrates must be cleaned, dry and free of dust, dirt, oil, grease, soil, soap residue, wax, flaking paint and other soluble contaminants.
Dura Grip Roller - Click here to buy more
Even when wet, your slippery floor’s slip resistance after the non-slip solution will surpass ANSI A137.1, A326.3 or B101.3 standards.
0.42 Wet DCOF - ANSI B101.3
0.45 Wet DCOF – ANSI A137.1 / A326.3
0.55 Wet SCOF - ANSI B101.1
- Easily applied with a 3/8” nap roller (One included per gallon).
- Clear is also available in a anti-slip water-based formula.
- One quart of non-slip floor paint covers up to 75 sq. ft. / One gallon covers 300 sq. ft.
Installation Instructions (TDS) Safety Data Sheet (SDS) Color Chart Primer available here!
- Dura Grip Non-Slip Paint offers a simple and inexpensive solution to reduce the likelihood of slip-and-fall injuries. Application of our high-performance non-skid textured epoxy coating provides safe foot traffic in both wet and dry conditions.
- Single component, the oil-based anti-slip paint coating is chemical resistant and durable to withstand heavy traffic. Semi-gloss paint coat is available in 10 popular colors and 3 sizes for maximum results.
- Barefoot-friendly texture offers non-skid protection for bare feet and tender paws, making it perfect for decks and patios. Equally effective for tough surfaces such as aluminum ramps, truck lift gates, metal stairs and concrete surfaces.
- Roller Included with Each Gallon & 5-Gallon Case includes x5 Rollers (Click here to buy more)
- To see gallery page of the product click here.
|Coverage per Sq Ft||75||300||1,500|
|Cost per Sq Ft (Appx.)||$0.87||$0.42||$0.38|
|⅜” Nap Rollers Included||-||1||5|
Q: Can I use Dura Grip on painted floor?
A: Lightly sand down the surface, clean and dry for surface preparation. For previously coated surfaces, consider using our Bonding Adhesion Promoter to have a more durable non slip surface.
Q: How many coatings do I need to apply?
A: Dura Grip needs to be applied with two light coats at least two hours apart using a fresh roller on the second coat.
Q: What kind of roller should I use?
A: We suggest using a cotton nap roller to ensure an even and consistent application. We do not suggest using textured rollers.
Q: How should I apply the product?
A: You should gently roll on a thin coat using the cotton nap roller. To ensure an even coat move the roller lightly in a forward and backward direction. It is not recommended to apply Dura Grip as one thick coat.
Q: Can I use Dura Grip underwater?
A: We do not advise that you use Dura Grip on a surface that is permanently submerged in water.
Q: What if my floor is a bright or a dark color?
A: It may be necessary to do 3 coats if you are coating lighter colors of Dura Grip over flooring that has bold, bright, or dark colors.
Q: Can I use Dura Grip on Wood?
A: Firstly, you would need to clean the wooden floor and then make sure that the surface is flat smooth. This includes sanding down splinters and hammering in nails and tightened exposed screws. We recommend using SlipDoctors’ Primer on wood prior to applying Dura Grip.
Q: Will the paint chip, peel or crack over time?
A: Inadequate drying time, excessive moisture presence, poor surface preparation, and failure to apply two thin coats of Dura Grip will increase your chance of early coating damage.
Q: Can Dura Grip be used on a Resin and/or Fiberglass coating?
A: Dura Grip can be used on Resin/Fiberglass surfaces and coatings. Surface prep includes light sanding, cleaning, and complete drying prior to application of Dura Grip. Previously coated surfaces must be cured prior to applying a top coat of Dura Grip.
Important: Prior to opening the product and applying always read instructions and call us if you are not sure.
Dura Grip - High Performance Non-Slip Epoxy Paint
So far I'm really happy with it.
Wish I had more prep time to smooth out some of the glass in my boats deck but after its painted it looks fantastic
I am so very impressed with this product. I needed to paint a cement shower floor that was in pretty bad shape. I called SlipDoctors and talked with the representative who helped me find the right product...Dura Grip. I prepared the floors and put on three coats, and am amazed at the beauty and durability of the surface. If one is using this inside, be prepared to vent the area well until the paint dries as the fumes are quite strong. But the slight inconvenience is well worth the results. I recommend this product with 5 stars.
First time I have tried this product. I used it in my surgery (veterinary hospital). We are tough on floors-moving equipment, mopped multiple times a day etc. So far it has help up well.
I have applied the primer and the Epoxy Paint and it is wonderful! It looks great and thus far, it is a great floor covering.
However, SlipDoctors needs to be a little bit more careful in shipping all of the product ordered, as they excluded the bonding agent. Not a big deal and not enough to put off the application of the epoxy paint, but still a little issue.
However, I would buy Dura-Grip High Performance Non-Slip Epoxy Paint again and again and again. It was easy to work with and the result is superb!
Customers Who Purchased This Item Also Viewed
Tuff Grip or Tuff Grip Extreme - Aggressive Traction Non-Skid Floor Paint