Safety Precautions: • Immediately wash off productwith soap and waterif product comes in contact with skin.
• Use product in a well-ventilated area.
• If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC. Contact the National Lead Hotline at 1-800-424-LEAD or www.epa.gov/lead
Optional Safety Equipment: • Chemical-resistant gloves
• Eye protection
• Mask
Surface Preparation: Surface Preparation varies by surface. Please
see technical data sheet for specific surface preparation instructions
Application Instructions: Step 1: For exterior applications,check weather conditions to be certain rain or dew is not imminent before product has had the opportunity to dry fully after application.
Step 2: TEST: Tuff Grip Clear should be tested on a small inconspicuous area before full application
Step 3: MIXING: Use paint shaker or hand stir to thoroughly mix before using. Stir occasionally during use. Do not mix Tuff Grip Clear with any compound containing solvent.
Step 4: APPLICATION: Apply with a texturedroller in 1-2 coats(2 coats recommended). UsingSlipDoctors 9” textured blue foam roller, apply Tuff Grip Clear in uniform coats applying with light even pressure. For best performance, avoid thick coats. Once dry to touch (2-4 hours), second coat should be applied at a right angle to the firstcoat.
Step 5: CLEAN UP:While Tuff Grip Clear is still wet, equipment may be cleaned with soap and water. Once dried, equipment may be cleaned with a solvent such as xylene.
Maintenance: For general cleaning and maintenance,use a light pressure rinsing. For best results to remove oily deposits or other foreign matter, apply pH-neutral cleaner at recommended dilution rate and scrub lightly with a soft bristle deck brush.