Dura Grip - High Performance Non-Slip Epoxy Paint

SlipDoctors

  • $65.00


Dura Grip High-Performance Non-Slip Epoxy Paint is an anti-slip surface coating specifically designed to provide a hard, durable barefoot-friendly textured paint finish on a variety of substrates. Dura Grip non-slip paint is ideal for use on diamond-plate metal ramps, garages, boat decks, trailers, stairs, locker rooms, laundry rooms and other residential and industrial areas where anti-slip protection is desired.

Dura Grip anti-slip paint coatings were designed to prevent slips and falls in your home and business. Built to last, Dura Grip is a tough and durable paint that can be used on multiple types of surface including steel, fiberglass, aluminum, concrete, wood, tiles & natural stone. It’s perfect for both commercial and residential areas and you can walk comfortably on Dura Grip even with bare feet. 

Dura Grip anti-slip textured paint is available in three sizes and an assortment of colors including black, clear, dark brown, light gray, medium gray, safety blue, safety yellow, safety red, sand and white.

Purchase Notes

  • Easily applied with a 3/8” nap roller (One included per gallon).
  • Clear is also available in a anti-slip water-based formula.
  • One quart of non-slip floor paint covers up to 75 sq. ft. / One gallon covers 300 sq. ft.

 

Installation Instructions (TDS) Safety Data Sheet (SDS) Color Chart Primer available here!
  • Dura Grip Non-Slip Paint offers a simple and inexpensive solution to reduce the likelihood of slip-and-fall injuries. Application of our high-performance non-skid textured epoxy coating provides safe foot traffic in both wet and dry conditions.
  • Single component, the oil-based anti-slip paint coating is chemical resistant and durable to withstand heavy traffic. Semi-gloss paint coat is available in 10 popular colors and 3 sizes for maximum results.
  • Barefoot-friendly texture offers non-skid protection for bare feet and tender paws, making it perfect for decks and patios. Equally effective for tough surfaces such as aluminum ramps, truck lift gates, metal stairs and concrete surfaces. 



Quart

Gallon
5 Gallon
Quart Gallon 5-Gallon
Coverage per Sq Ft 75 300 1,500
Cost per Sq Ft (Appx.) $0.87 $0.42 $0.38
⅜” Nap Rollers Included - 1 5
Volume (liters) 0.97 3.78 18.92
FAQ

Q: Can I use Dura Grip on painted floor?

A: Lightly sand down the surface, clean and dry for surface preparation. For previously coated surfaces, consider using our Bonding Adhesion Promoter to have a more durable non slip surface.

Q: How many coatings do I need to apply?

A: Dura Grip needs to be applied with two light coats at least two hours apart using a fresh roller on the second coat.

Q: What kind of roller should I use?

A: We suggest using a cotton nap roller to ensure an even and consistent application. We do not suggest using textured rollers.

Q: How should I apply the product?

A: You should gently roll on a thin coat using the cotton nap roller. To ensure an even coat move the roller lightly in a forward and backward direction. It is not recommended to apply Dura Grip as one thick coat.

Q: Can I use Dura Grip underwater?

A: We do not advise that you use Dura Grip on a surface that is permanently submerged in water.

Q: What if my floor is a bright or a dark color?

A: It may be necessary to do 3 coats if you are coating lighter colors of Dura Grip over flooring that has bold, bright, or dark colors.

Q: Can I use Dura Grip on Wood?

A: Firstly, you would need to clean the wooden floor and then make sure that the surface is flat smooth. This includes sanding down splinters and hammering in nails and tightened exposed screws. We recommend using SlipDoctors’ Primer on wood prior to applying Dura Grip.

Q: Will the paint chip, peel or crack over time?

A: Inadequate drying time, excessive moisture presence, poor surface preparation, and failure to apply two thin coats of Dura Grip will increase your chance of early coating damage.

Q: Can Dura Grip be used on a Resin and/or Fiberglass coating?

A: Dura Grip can be used on Resin/Fiberglass surfaces and coatings. Surface prep includes light sanding, cleaning, and complete drying prior to application of Dura Grip. Previously coated surfaces must be cured prior to applying a top coat of Dura Grip.

Important: Prior to opening the product and applying always read instructions and call us if you are not sure.

Customer Reviews

Based on 13 reviews Write a review

Customers Who Purchased This Item Also Viewed


Sale

Unavailable

Sold Out