Dura Grip - High Performance Non-Slip Epoxy Paint

• Dura Grip Non-Slip Paint offers a simple and cost-effective solution to help reduce the likelihood of slip-and-fall injuries. Our high-performance non-skid textured epoxy coating provides increased traction for foot traffic in both wet and dry conditions.
• This single-component, oil-based anti-slip paint is chemical resistant and highly durable, making it suitable for heavy-traffic areas. The semi-gloss finish is available in 10 popular colors and 3 sizes.
• Its barefoot-friendly texture provides non-skid protection for bare feet and paws, making it ideal for decks and patios. Dura Grip is equally effective on demanding surfaces and applications such as aluminum ramps, truck lift gates, metal stairs, and concrete surfaces.
• NOTE: Due to DOT regulations, this product can only ship via ground transportation.

• Quart: Up to 75 sq ft
• Gallon: Up to 300 sq ft

Dura Grip High-Performance Non-Slip Epoxy Paint is an anti-slip surface coating specifically designed to provide a UV-resistant, highly durable, barefoot-friendly textured paint finish on a variety of substrates. Dura Grip non-slip paint is easy to maintain and ideal for use on diamond plate, metal ramps, boats, decks, trailers, stairs, garage floors, locker rooms, pools, laundry rooms, and other residential or commercial areas where anti-slip protection is required.

Dura Grip provides a tough, textured finish designed to help prevent slips and falls in homes, businesses, and high-traffic environments. It can be used on multiple surface types, including steel, fiberglass, aluminum, concrete, asphalt, painted surfaces, wood, athletic courts, and wood decks. It is suitable for both indoor and outdoor commercial or residential applications while remaining comfortable to walk on with bare feet.

For garage floors and other concrete applications, proper surface preparation is essential. If Dura Grip is used in a garage exposed to hot tire traffic, a 2-part top coat is required. Dura Grip can also help protect metal and other suitable surfaces against salt and corrosion.

Applying to concrete? Epoxy coatings require a minimum CSP 3–4 for proper adhesion. Correct surface profiling and priming are critical for the coating to bond correctly and perform long term. Download our Concrete Surface Preparation & Coating Guide to ensure your surface is correctly prepared before application.

• Read product label and Technical Data Sheet (TDS) thoroughly before application to review safety precautions, surface preparation, and full application instructions.
• Videos are available to illustrate basic application instructions.
• Always wear the recommended safety equipment and follow safety precautions.
• Slight color variations are possible between different lot numbers. We recommend mixing paint from different lot numbers together to achieve consistent color results.

• Surface preparation varies by surface. Please review the TDS for detailed information.
• Do not apply when surface temperature is below 50F (10C) or above 90F (32C).
• All substrates must be clean, dry and free of dust, dirt, oil, grease, soil, soap residue, wax, flaking paint and other soluble contaminants. Any areas exposed to high amount of water, such as pool decks or outdoor concrete pads, we require the use of Hydro Prime concrete sealer prior to installation of Dura Grip.

• For exterior applications, check weather conditions to be certain rain or dew is not imminent before the product has fully dried.
• Use drill mixer or hand stir DuraGrip to thoroughly mix before using. Stir occasionally during use.
• Apply using a 3/8 inch nap roller in 1-2 coats (2 coats recommended). Apply in uniform coats with light, even pressure. Avoid thick coats. The second coat should be applied at a right angle to the first coat.
• CLEAN UP: While DuraGrip is still wet, equipment may be cleaned with soap and water. Once dried, equipment may be cleaned with xylene or paint thinner

• For general cleaning and maintenance, rinse with light pressure rinsing
• To remove oily deposits or foreign matter, use pH-neutral cleaner and scrub lightly with a soft bristle deck brush.
• Do not use alcohol-based cleaners, as they may affect durability.