Base Coat 2K Epoxy Paint Primer - Light Gray

• Penetrates to provide excellent adhesion.
• Chemical, abrasion and impact resistance.
• Easy to apply and self-priming.
• Tight film and low permeability.
• Enhances the overall durability.

• Up to 300 sq. ft. per Gallon on smooth surfaces

• Up to 150 sq. ft. per Gallon on rough concrete

Introducing Base Coat, the high-performance 2k epoxy floor primer designed to elevate the durability of your surface topcoats. Our formula works to increase adhesion, preventing peeling or flaking for long-lasting results. Ideal for industrial and commercial applications, Base Coat 2k epoxy primer boasts exceptional corrosion resistance, creating a robust barrier against weather damage and rust. This extends the lifespan of your topcoat and ensures reliable protection in demanding environments. Base Coat is chemically resistant, making it the ideal 2k epoxy floor primer for areas exposed to harsh substances.

Experience unmatched durability with Base Coat's epoxy primer, enhancing the resistance of your painted surfaces. This high-performance 2k primer not only provides excellent coverage, reducing paint consumption but also ensures a uniform and high-quality finish. Trust Base Coat's temperature tolerance for both outdoor and indoor surfaces, delivers reliable performance in diverse environments. Base Coat 2k epoxy primer is a versatile application that excels under various topcoats, including epoxy, polyurethane, and acrylic. Recommended for use on concrete, previously painted surfaces, and galvanized steel and aluminium.  If you require the Base Coat primer in a different color please contact us.

Mixing

• Stir each component to a uniform consistency using a slow speed explosion proof drill with a Jeffy Mixer. Do not mix by hand. Make sure any pigment that settled on the bottom is incorpo- rated. Do not vary proportions.
• Mix the entire container of Base (Part A) with the entire container of Hardener (Part B) with slow speed explosion proof drill with a Jiffy Mixer.
• Thin up to 10% by volume for airless spray and up to 20% by volume for conventional spray. When rolling, thin 10-20% by volume.
• POT LIFE: Three (3) Hours @ 75oF (23o).

Application

• Do not apply until the surface has been properly prepared.
• Always apply a test patch for approval prior to application.
• Do not apply to surfaces below 45oF (7oC) or above 120oF (48oC). Do not apply over dew or frost.
Surface should be dry and at least 5oF above the dew point. Do not apply over expansion joints.
• Immediately after mixing, apply using a 3/8” nap roller.
• USED AS PRIMER: Apply two coats at approximately 5-7 mil DFT for light traffic areas. For heavy forklift and high-abrasion areas, a 2-3 mil DFT thickness is recommended. USED WITH FLAKE SYSTEMS: Apply between 120-150 square feet per gallon, approximately 8-10 mils DFT.
• For safety and proper product curing, good ventilation is necessary when painting indoors or in confined areas.
• NOTE: Slight color variations are possible between different lot numbers. For this reason, we recommend mixing paint from different lot numbers together to achieve consistent color results.