Bathtub Kit Anti-Slip for Porcelain & Ceramic
Bathtub Kit for Porcelain or Ceramic Tubs & Showers. The CDC estimates that about two-thirds of accidental injuries happen in the bathtub or shower. Don’t wait for you, your family or your residents to be a statistic! We have developed an exclusive treatment specifically for your bathroom, including both bathtubs and showers.
The SlipDoctors Bathtub and Shower Treatment Kit is the perfect solution to treat porcelain or ceramic bathtubs and showers. The treatment is easy, and only takes about 10 minutes. After one simple treatment, you can relax knowing your shower and bathtub are slip-resistant. The Kit is specially formulated to interact with the minerals in porcelain and ceramic surfaces to increase surface traction. Our products are carefully formulated to achieve the desired results without changing the appearance of the surface.
Quart container will treat about 25 standard size bathtubs. Kit includes measurement bottles, scouring pads, gloves.
Even when wet, your slippery floor’s slip resistance after the non-slip solution will surpass ANSI A137.1, A326.3 or B101.3 standards.
0.63 Wet DCOF - ANSI B101.3
0.65 Wet DCOF – ANSI A137.1 / A326.3
0.72 Wet SCOF - ANSI B101.1
One bathroom kit covers one standard bathtub or shower.Installation Instructions (TDS) Safety Data Sheet (SDS)
• Barefoot Friendly
• Increases Traction
• Fast & Easy Application
• Application Time 10 Minutes
• Not a Coating
• Long-lasting Results
|1 Standard Bathub or Shower||1||2||4|
|Cost per Sq Ft (Appx.)||$2.33||$2.00||$1.67|
|Volume (ounces)||2 oz||4 oz||8 oz|
• Use in a well-ventilated area
Optional Safety Equipment:
• Wear a long sleeve shirt
• Eye protection
• Nitrile glove (included)
Clean the bathtub/shower using a general household cleaner. Rinse several times with clean water. Use a towel to dry the bathtub completely. If possible, remove drain or protectdrain by adding tapwater to cover it. Avoid extended direct contact with metal surfaces.
Step 1: Pour contents of one bottle onto the bottom of a standard-size bathtub. (Use the second bottle when treatingoversized tubs or showers).
Step 2: Using the scrub pad, spread the product over the bottom of the bathtub or shower. The solution should cover the entire surface.
Step 3: Allow the solution to sit for approximately 4-8 minutes, spreading the liquid to keep the surface wet. Do not allow the solution to dry on the surface.
Step 4: If solution comes in contact with skin, metal or any other surface, wash off immediately.
Step 5: Open the drain, and thoroughlyrinse your bathtub/shower several times and allow to air dry.Enjoy your new slip-resistant bathtub or shower!
For general cleaning and maintenance,use a pH-neutral cleaner and soft bristle brush in a circular scrubbing motion to agitate the surface of your shower or tub.
I haven’t used it yet, but it seems like it will work well.
it worked and is easy to apply
Purchased for a friend.
We have a 100 year old tub that has seen better days. No matter how often we clean it it’s still slippery. Used your product 2 weeks ago and what a difference! I’m starting to find some small areas slightly slippery again so might reapply in a few weeks. Overall, best results I could have expected for my very old tub!
Customers Who Purchased This Item Also Viewed
Tuff Grip or Tuff Grip Extreme - Aggressive Traction Non-Skid Floor Paint