Ultra Grip Premium Extra Texture Non-Skid Epoxy Paint

• SlipDoctors Ultra Grip is a two-component, high solids, heavy duty anti-slip epoxy coating designed for industrial and marine applications and is also available in Low Temp and Low VOC versions for projects requiring cure in colder temperatures or lower VOC content.
• Provides unparalleled chemical resistance and increased traction in wet and slippery areas in rugged work environments such as drilling rigs, aircraft carriers, and other extreme situations.
• Ultra-durable coating that can withstand tough weather conditions and forklift traffic and is resistant to grease, oil, saltwater, alcohol, detergent, and gasoline.
• Ideal for both interior and exterior applications on concrete, steel, diamond plate metal, ramps, warehouses, marine areas, food processing areas, and many other surfaces.
• Exceeds MIL-PRF-24667B military standard for slip resistance (1.10 dry / 1.14 wet)
• Low temp cure option available for cure in temps as low as 24 F (-4 C).
• Apply with phenolic roller or squeegee for varied texture finishes.
• NOTE: Due to DOT regulations, this product can only ship via ground transportation.

• Phenolic Roller: Appx 30-40 sq ft per Gallon
• Trowel/Squeegee: Appx 40-50 sq ft per Gallon

SlipDoctors Ultra Grip is the latest and most aggressive anti-skid paint, with the ultra-rough textured gloss finish composed of a two-part epoxy that gives it extraordinary durability. Ultra Grip’s extreme texture makes it suitable for high traffic surface types like steel, diamond plate, wood, ramps, truck beds and more. Ultra Grip’s two-part epoxy composition makes it especially ideal for industries exposed to harsh chemical environments. Experience unparalleled resistance and anti-slip safety with Ultra non-skid floor paint available in dark gray, light gray, black, and yellow with multiple options in the range including the new Low VOC version.

The application is simple, and it takes only two hours for the non-skid grip coating to be dry to the touch and then fully cured after 24 hours. You can roll it on with a phenolic roller or apply it using a squeegee if you're aiming for a specific texture. Ultra Grip is a remarkable non-skid paint that boasts top-notch traction levels, making it an impeccable choice for any indoor or outdoor areas that are frequented by vehicles or pedestrians. This non-skid paint ensures maximum safety by providing unparalleled slip-resistance for almost any situation.

Ultra Grip has been third-party tested and exceeds the U.S. military standard MIL-PRF-24667B for slip resistance, achieving coefficients of friction of 1.10 (dry) and 1.14 (wet), which significantly surpass the required thresholds. Combined with its broad chemical resistance (including fuels, oils, and acids), Ultra Grip is a top-tier choice for industrial and high-risk environments. Download PDF

Whether it's for commercial or residential use, Ultra Grip offers superior traction in any space that demands it. From warehouse floors to outdoor ramps, this paint has got you covered.

Applying Ultra Grip to concrete? A coating engineered to exceed military slip resistance standards deserves a surface that is prepared to match. Ensuring your concrete is at the correct profile before application allows Ultra Grip to bond at full strength and deliver the performance it is built for. Download our Concrete Surface Preparation & Coating Guide to find out how to prepare your concrete surface correctly before application.

• Read product label and Technical Data Sheet thoroughly before application to review safety precautions, surface preparation, and full application instructions.
• Videos are available to illustrate basic application instructions.
• Always wear the recommended safety equipment and follow safety precautions.
• Slight color variations are possible between different lot numbers. We recommend mixing paint from different lot numbers together to achieve consistent color results.

• Surface preparation varies by surface. Please review the TDS for detailed information.
• Application Temperatures: 50-120 F (Regular Cure) and 40-80 F (Low Temp Cure).
• Do not apply until the surface has been properly prepared. If the substrate is not properly prepared, failure of the product to adhere to the substrate may occur.
• All sealers, chemical contaminants, grease, oil, and other foreign material must be removed.
• Surfaces must be clean, dry, and structurally sound.

• Do not apply over expansion joints. Do not apply if surface temperature is within 5 degrees of dew point.
• Always apply a test patch for approval prior to application.
• Mix 4:1 by volume. Mix four parts Base (Part A) to one part Hardener (Part B) with a 400-600 RPM explosion-proof variable speed drill and Jiffy mixer.
• Both the Base and the Hardener must be agitated separately prior to mixing. Use immediately after mixing. No induction time needed. Thinning is not recommended.
• POT LIFE @75 F for 60 to 90 Minutes (Regular Cure); 60 Minutes (Low Temp Cure).
• Applying Ultra Grip with a phenolic roller will produce a uniform ridged surface. Apply with a trowel/squeegee if a smoother surface is desired.
• Immediately after mixing, pour a ribbon of the mixed material measuring approximately 2-3 feet long and 6 inches wide onto the surface.
• Phenolic Roller: Pull the material towards you using some pressure. Do not over roll material as this can decrease the anti-slip traction. Roll material only in one direction. Strike off any excessive material buildup on edges from roller nap. The spread rate is approximately 30-40 sq ft per gallon.
• Trowel/Squeegee: Pour 2-3 feet wide ribbon. Hold trowel/squeegee at 45 degree angle and pull material toward you. Apply an even thickness at a coverage rate of approximately 40-50 sf ft per gallon.
• CLEAN UP: Clean spills, splatters, tools, and equipment promptly with mineral spirits or paint thinner.