Tuff Grip or Tuff Grip Extreme - Aggressive Traction Non-Skid Floor Paint
Tuff Grip is high-performance non-skid paint coating specifically designed to provide an aggressive and highly textured anti-slip finish on a variety of surface types including metal, concrete, previously painted concrete, and wood. Tuff Grip non-skid urethane paint coating can withstand all weather conditions, Tuff Grip is ideal for use on loading ramps, walkways, warehouse floors, machine-operating areas, factory floors, truck bedliners, equipment beds and other surfaces where a high-traction non-skid paint coating is needed. Ideal for virtually any indoor or outdoor areas.
Tuff Grip non-skid paint solution is available in 10 colors for applications in Black, Dark Brown, Safety Blue, Light Gray, Medium Gray, Safety Yellow, Safety Red, and Sand. Custom anti-slip paint colors can also be produced on request. Minimum order quantities apply.
Tuff Grip Extreme non-skid paint upgrade option offers a grip coating with added benefits above and beyond the regular Tuff Grip such as added UV protection and a quick drying time of 4-6 hours. Tuff Grip Extreme’s durable non-slip paint coating also increases chemical and corrosion resistance.
Tuff Grip Roller - Purchase More ($10 each)
For Metal / Aluminum use Primer for best results.
Even when wet, your slippery floor’s slip resistance after the non-slip solution will surpass ANSI A137.1, A326.3, ANSI/ ASSE A1264.2, B101.1 and B101.3 standards.
0.65 Wet DCOF - ANSI B101.3
0.68 Wet DCOF – ANSI A137.1 / A326.3
0.99 Wet SCOF - ANSI B101.1
- Uses include loading ramps, rooftop walkways, warehouse floors and more. Ideal for industrial settings or heavy traffic areas. It is a high-traction paint coating that is durable and easy to apply.
For each gallon of Tuff Grip Non-Slip Paint, the Extreme Kit also includes one pint Crosslinker and one 9” textured roller. In addition, we also include one paint mixer drill attachment and paint can opener per order.
One gallon covers up to 100 sq. ft. per coat (2 coats recommended).
- Roller Included with Each Gallon (Click here to buy more)
|TUFF GRIP||TUFF GRIP EXTREME|
|Dry Time||24 Hours||4 - 6 Hours|
|Recoat Time||2 - 4 Hours||1 - 2 Hours|
|What's Included (per Gallon)||Tuff Grip Gallon + 9" Textured Roller||Tuff Grip Gallon + Crosslinker Pint + 9" Textured Roller. Extreme Kit also Includes 1 Paint Mixer & Can Opener per order.|
|Coverage per Gallon||75 - 100 Sq Ft||75 - 100 Sq Ft|
|Avg Cost per Sq Ft||$1.31||$1.76|
|Colors Available||10 Colors||9 Colors (Extreme not Available in Clear)|
• Immediately wash off productwith soap and waterif product comes in contact with skin.
• Use product in a well-ventilated area.
• If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC. Contact the National Lead Hotline at 1-800-424-LEAD or www.epa.gov/lead
Optional Safety Equipment:
• Chemical-resistant gloves
• Eye protection
Surface Preparation varies by surface. Please see technical data sheet for specific surface preparation instructions
Step 1: For exterior applications,check weather conditions to be certain rain or dew is not imminent before product has had the opportunity to dry fully after application.
Step 2: TEST: Tuff Grip Clear should be tested on a small inconspicuous area before full application
Step 3: MIXING: Use paint shaker or hand stir to thoroughly mix before using. Stir occasionally during use. Do not mix Tuff Grip Clear with any compound containing solvent.
Step 4: APPLICATION: Apply with a texturedroller in 1-2 coats(2 coats recommended). UsingSlipDoctors 9” textured blue foam roller, apply Tuff Grip Clear in uniform coats applying with light even pressure. For best performance, avoid thick coats. Once dry to touch (2-4 hours), second coat should be applied at a right angle to the firstcoat.
Step 5: CLEAN UP:While Tuff Grip Clear is still wet, equipment may be cleaned with soap and water. Once dried, equipment may be cleaned with a solvent such as xylene.
For general cleaning and maintenance,use a light pressure rinsing. For best results to remove oily deposits or other foreign matter, apply pH-neutral cleaner at recommended dilution rate and scrub lightly with a soft bristle deck brush.
We decided not to use the product. It was returned
Testing an area with paint brush soon. Too cold to paint currently.
Thank you for purchasing our product. Team SlipDoctors
Solved my probl of tile being very slippery when wet.
Thank you for taking the time to share your feedback. Team SlipDoctors