Deck Grip - Clear Indoor & Outdoor Non-Slip Sealer for Concrete

• Versatile Anti-Slip Coating: Deck Grip is a water-based acrylic sealer designed for concrete and various stone surfaces, delivering a durable, non-yellowing, chemical-resistant, and UV-resistant finish.
• Poolside Safety Solution: Ideal for treating slippery pool decks, sealed or unsealed stamped concrete, providing exceptional slip resistance even when wet, surpassing ANSI safety standards.
• Ease of Application: Comes with a 3/8 inch nap roller included per gallon, allowing for easy application indoors or outdoors. Apply two thin coats (three for textured surfaces) on clean, dry areas for optimum durability and traction.
• Available Sizes: Deck Grip is available in 1-gallon and 5-gallon pails, with each gallon covering 300 to 600 square feet, offering ample coverage for various surface areas.
• Clear, Semi-Gloss Finish: Offers a clear, semi-gloss anti-slip finish that is barefoot-friendly, making it an excellent choice for areas where comfort and safety are paramount, such as poolside spaces.

• Gallon: Up to 300-600 sq. ft.
• 5-Gallon: Appx 2,500 sq. ft.

Introducing Deck Grip, an innovative anti-slip sealer designed for concrete and various stone surfaces. This adaptable non-slip coating, crafted from a non-yellowing, water-based acrylic, boasts easy application. Deck Grip gives concrete a clear, semi-gloss finish that is safe to walk on, and durable thanks to the chemical and UV resistance.

Deck Grip is suitable for slippery pool decks, as well as sealed or unsealed stamped concrete decks. It works well on various natural stone surfaces that require anti-slip protection.

Deck Grip is a specially designed product, perfect for sealed stamped concrete surfaces. It is highly effective when applied over any type of sealer, and it offers exceptional resistance against both chemical substances and chlorine. It is particularly suited for areas around pools and spas.

• Read product label and Technical Data Sheet (TDS) thoroughly before application to review safety precautions, surface preparation, and full application instructions.
• Videos are available to illustrate basic application instructions.
• Always wear the recommended safety equipment and follow safety precautions.

• Surface preparation varies by surface. Please review the TDS for detailed information.
• All substrates must be clean, dry, and free of dust, dirt, oil, grease, soil, soap residue, wax, flaking paint, and other soluble contaminants.

• Deck Grip should not be thinned in any way.
• Pour one gallon of Deck Grip into a separate container. Open the bottle of the included Deck Grip Additive and pour entire contents into the container with the Deck Grip. Mix thoroughly for even distribution. Stir often during application to ensure consistent Additive distribution.
• A sample test is recommended to assure maximum performance and suitability for the intended use. Test product in an inconspicuous area and allow to fully cure to test results.
• The Deck Grip mixture should be applied by rolling. Use the included 3/8” nap roller to evenly coat the surface. Avoid puddling in low areas. If puddles occur, roll them out immediately.
• Applying two thin coats is recommended rather than one thick coat. Wait 2-4 hours between coats. Roll the second coat at a right angle to the first coat.
• Dry times: Allow 6-12 hours for foot traffic and 24 hours for wheel traffic.
• CLEAN UP: While Deck Grip is still wet, application equipment can be cleaned with soap and water. Mixed material should be used or discarded.

• For general cleaning, use a pH-neutral cleaner to scrub lightly with a soft bristle deck grush or use a low-pressure rinse.
• Avoid using alcohol-based cleaners.