Stone Grip - Non-Slip Tile Treatment

My wife had slipped on our 16x16 bathroom tile and needed to fix this problem. We found stone grip and thought try it out before replacing all the tile. The product was very easy to use, did not change the look of our tile and amazingly enough, now it isn’t slippery when wet. I’m not exactly sure how it etches the surface but it worked well for us and we’re glad we found the product.

I have a rather large shower floor (27 sq. ft.), and I've been cursing the contractor that built it for years! The tile has been like an ice skating rink when wet, despite its rather small individual size (about 4 in. x 2 in.). I bought a quart of Stone Grip and still have enough left over for another coat, and that's AFTER putting two coats on there. It's transparent after application and really works! Instead of water beading or making it unsafe, Stone Grip makes it "grippy" and not rubbery feeling. One coat may have done it, but I wanted to put down two coats and left each on about 15 min. before neutralizing. It's really easy to apply. It doesn't smell, and you just need protection for your skin. I hope it lasts a long time, but I'd gladly reapply, because it really works, and now I feel safe and don't think about my contractor! I should have done this years ago.

I didn’t want a lot of grout on my shower floor. I laid large porcelain tiles, which were beautiful but slippery. I applied the Stone Grip and left it on for 15 minutes. Then I rinsed it off. It worked immediately. I can’t see any difference, but I can feel it. It’s not slippery anymore.

Our extremely slick ceramic tile floors are now perfectly walkable, even when wet or with wet shoes. Just in time for pool season, too. I was researching traction paints as an option instead of replacing the whole floor when I ran across Stone Grip and thought it was worth a try.

The tiles look exactly the same as before, but now there's real traction. They are still glossy, but I can tell a difference when I dust mop and definitely with wet shoes. The white tiles look exactly the same. The black tiles may have a tiny bit less gloss, but it's not noticeable unless you know what you are looking for and look at them from one particular angle. The floor has gone from safety hazard to just right with one 15 minute application.

Application was easy, just follow the instructions. Clean the floor, spread the product with the applicator, let it sit 15 minutes (or whatever your test determines), spray the neutralizer, mop it up. It's really that simple. I 100% recommend and would buy again.

This product was easy to apply and left no unsightly residue. Our walkway tiles are no longer slick due to rain or dew. Works as advertised!

I am really impressed with this product. We had porcelain tiles at the entrance of our facility that got really slick when it rained. I bought the product and applied it exactly like it said and the results were amazing. No matter how wet the tiles get you still have good traction to prevent a slip and fall. Very Impressed and would definitely recommend to anyone!

Excellent product for LFT curbless showers. Easy application and detailed instructions. Traction level achieved is amazing. Will use again and again!! Highly recommend for porcelain tile shower floor application.

We used Stone Grip on our shower floor which had large format tiles that got slippery from soap and shampoo. We were hesitant to try Stone Grip but it was our last attempt before replacing the tiles. WOW, are we glad we did. Our shower floor is no longer a slip hazard, and the tiles look the same as when we started. We would recommend using the Stone Grip applicator which we found to work the best at spreading an even coat. Great product and easy to use.

Applied it as directed to a stone tile floored shower. Works great- feels like a thin transparent layer of rubber on the floor. Appearance is the same as before, but no no slip-n-slide.

I was skeptical about the Slip Doctor’s Stone Grip and so was my contractor. He had just finished renovating my handicap accessible bathroom so everything was brand new and beautiful. The only thing was the cement tile in the shower and the quartz bench were too slippery! I called Slip Doctors toll free number and spoke with a salesperson who asked all kinds of questions about what types of material needed treatment. He explained in detail what I needed so I ordered it. My contractor grudgingly applied the Stone Grip to the shower tile (tested on an extra tile first) but only applied it for 5 minutes because he was afraid of what it would look like. Well that didn’t work so I asked him to apply it for 10 more minutes, which he did and wow, what a difference!! The tile is the same throughout the whole bathroom floor, including the shower; there’s no shower curb at the entrance of the shower. After the Stone Grip treatment you cannot tell any difference in appearance but it’s no longer slippery! I was very scared to step on the wet tile at first and walked in holding all the grab bars but I didn’t need to be afraid; I can walk around my wet shower knowing I’m safe from falling. It’s truly an amazing product!

Hello,
I represent XXXX, our company has been in the surface cleaning, restoration & protection industry for over 22 years. During that time we have developed procedures and engineered equipment purpose-built to deliver astounding results and achieve the highest level of service possible through human, mechanical & chemical processes.

Within the last few months we were introduced to your product through a client who was referred to us by their builder. The issue that caused them to reach out was one you know well and have developed the solution for… An expansive patio and pool deck area beautifully tiled in designer porcelain that fulfilled their every aesthetic desire but was unusable due the treacherous nature of the slip and fall danger presented even while completely dry.

Their research pointed them to your product which we were then tasked with the application thereof. After conferring with your technical support division we utilized your product combined with our cleaning and preparation procedures and the results were truly amazing.

When I asked the client to step out and test the finished product (surface) she oh so carefully, gingerly and timidly began to step out onto the patio… To which I said… “Oh, no, not like that, just walk right out normally, without fear” which she did reluctantly at first, but then immediately began to walk and halt, walk and halt with absolute confidence. She was thrilled to be able to put to use and enjoyment the area specifically created for precisely that.

Tried two variations of your product on my tile shower floor. Neither worked.

Applied one coat to white ceramic tile on my shower floor. Waited about 10 minutes before rinsing it off. It worked amazing the next time I took a shower and I wasn’t sliding around like Bambi on ice! I’m amazed by the results. And I haven’t noticed any change to the tile appearance.
So far all I can say is this product works as advertised

We installed large scale porcelain tile around our pool with a slip rating of R11. However stepping out of the pool and walking in wet bare feet felt very slippery and dangerous. I applied Stone Grip and left it on for 18 minutes, rinsed it off, and voila, it worked. Nice and grippy. Not like concrete or cool-coat, but much improved. So far very pleased. Not sure how long it will last and I wonder if the etching does any damage to the tile surface. But so far, so good.

I have a brand new shower and the tiles were very slippery. I followed directions and applied slip doctor to the tiles for approximately eight minutes. Marked difference. No longer am I slipping on the tile floor.
Your product is significantly cheaper than bruises from falling or broken bones. Really do I highly recommend a product, but this is the exception.

I was so skeptical about this product. I manage a sauna site that hosts thousands of people annually. We got a new building in November that features some beautiful green tile, but it was terrifying to walk on with or without shoes. We treated it with the stone grip and 20 minutes later we have 100% more confidence in our footing and can retire the ugly grippy mats we used for traction with very mid results. We purchased the smaller size with the applicator.

The product work great. Would recommend to any one that what to prevent a fall and slip. Great product amazing.

The product works great

IT WORKS GREAT! We have a vacation rental in the Bahamas that sleeps 20 people. Their customer service warned us it might not work on tile underwater but we were desperate and tried it and after 6 months of continual use we have not had one problem! Works so good and very easy to install.

Our client picked a leathered marble cooing material for their pool however it was a little too slippery when wet. We applied this product as directed and the client is very happy with the results. Thanks for making a great product.

The Duragrip with the extra grip went on easy and is a quick fix for an old tile floor.

We purchased stone grip to coat the tile on our porch and patio. It has been very successful. It added enough grip that when it gets wet we don't worry about ourselves, grand-children or elderly parents slipping. I like that you can leave it on longer to get a better grip if you feel you need it. It also did not discolor our ceramic tile.

I bought the Stone Grip for our shower floor, which is a natural stone/pebble tile. It was very slippery, and I had already slipped and fallen once. I wanted to find something that improved traction without compromising the look of the tile, and this product did exactly that. This was very easy to apply, and didn’t take very long at all - I did let it sit for 15 min before rinsing with the water/baking soda neutralizer mix, and then I gave the entire shower floor a good final rinse with clean water. Now we feel safer in our shower because the floor has much better traction, and the tile still looks as beautiful as the day it was installed! I’m very glad I found this product!