Tuff Grip or Tuff Grip Extreme - Aggressive Traction Non-Skid Floor Paint
- SlipDoctors Tuff Grip is a high-performance anti-slip urethane coating that is designed for areas or equipment that require high traction anti-slip protection.
- It is a textured anti-slip industrial paint finish for metal substrates as well as a general floor coating.
- Ideal for use in industrial and heavy-traffic areas. Uses include loading ramps, rooftop walkways, warehouse floors, and more.
- For even greater performance, try SlipDoctors Tuff Grip Extreme Kit that includes a Crosslinker that gives Tuff Grip increased UV protection, greater chemical resistance, faster cure time and increased corrosion resistance.
- Once Tuff Grip Extreme Kit is applied, the product will dry to a hard, durable surface within 4-6 hours.
- NOTE: Due to DOT regulations, this product can only ship via ground transportation
- Gallon: Up to 50-75 sq. ft.
Tuff Grip is a high-performance non-skid paint coating specifically designed to provide an aggressive and highly textured anti-slip finish on a variety of surface types including metal, concrete, previously painted concrete, and wood. Tuff Grip non-skid urethane paint coating can withstand all weather conditions, Tuff Grip is ideal for use on loading ramps, walkways, warehouse floors, machine-operating areas, factory floors, truck bed liners, galvanized steel, equipment beds, and other surfaces where high-traction non-skid paint coating is needed. Ideal for virtually any indoor or outdoor area.
Tuff Grip non-skid paint solution is available in 10 colors for applications in Black, Dark Brown, Safety Blue, Light Gray, Medium Gray, Safety Yellow, Safety Red, and Sand. Custom anti-slip paint colors can also be produced on request. Minimum order quantities apply.
Tuff Grip Extreme non-skid paint upgrade option offers a grip coating with added benefits above and beyond the regular Tuff Grip such as added UV protection and a quick drying time of 4-6 hours. Tuff Grip Extreme’s durable non-slip paint coating also increases chemical and corrosion resistance.
- Read product label and Technical Data Sheet thoroughly before application to review safety precautions, surface preparation, and full application instructions.
- Videos are available to illustrate basic application instructions.
- Always wear the recommended safety equipment and follow safety precautions.
- Slight color variations are possible between different lot numbers. We recommend mixing paint from different lot numbers together to achieve consistent color results.
- Surface preparation varies by surface. Please review the TDS for detailed information.
- Test product in an inconspicuous area before full application to determine dry time and back rolling texture.
- Surface, air, and product temperature must be 40 F (4 C) and at least 5 F (-15 C) above dew point.
- All substrates must be clean, dry, and free of dust, dirt, oil, grease, soil, soap residue, wax, flaking paint, and other soluble contaminants.
- Stir or use hand drill mixer to thoroughly mix before applying. Mix occasionally during application.
- Two light coats are recommended rather than one thick coat.
- Allow the first coat to dry for approximately 15 minutes. Then, back roll with light even pressure to create high-traction peaks.
- Recoat following the same procedure.
- If applying two coats, a new roller may be needed for the second coat
- Use a hand drill mixer to thoroughly mix Tuff Grip. Pour into a separate container. Add Crosslinker and mix well using a hand drill mixer. The mix ratio of Tuff Grip to Crosslinker is 8:1. Mixed material will have a pot life of 30-90 minutes. Mix occasionally during application.
- Two light coats are recommended rather than one thick coat.
- Allow the first coat to dry for approximately 15 minutes. Then, back roll with light even pressure to create high-traction peaks.
- When applying, be aware of the quick dry time.
- If applying two coats, a new roller may be needed for the second coat.
- CLEAN UP: Clean spills, splatters, tools, and equipment promptly with mineral spirits or paint thinner.
- Use a pH-neutral degreaser and deck brush or power wash to clean using low to medium pressure.
- Wait at least 7 days after application to power wash.
