Bathtub Kit Anti-Slip for Porcelain & CeramicS-TR-BATHKT
Bathtub Kit for Porcelain or Ceramic Tubs & Showers. The CDC estimates that about two-thirds of accidental injuries happen in the bathtub or shower. Don’t wait for you, your family or your residents to be a statistic! We have developed an exclusive treatment specifically for your bathroom, including both bathtubs and showers.
The SlipDoctors Bathtub and Shower Treatment Kit is the perfect solution to treat porcelain or ceramic bathtubs and showers. The treatment is easy, and only takes about 10 minutes. After one simple treatment, you can relax knowing your shower and bathtub are slip-resistant. The Kit is specially formulated to interact with the minerals in porcelain and ceramic surfaces to increase surface traction. Our products are carefully formulated to achieve the desired results without changing the appearance of the surface.
Quart container will treat about 25 standard size bathtubs. Kit includes measurement bottles, scouring pads, gloves.
Even when wet, your slippery floor’s slip resistance after the non-slip solution will surpass ANSI A137.1, A326.3 or B101.3 standards.
0.63 Wet DCOF - ANSI B101.3
0.65 Wet DCOF – ANSI A137.1 / A326.3
0.72 Wet SCOF - ANSI B101.1
One bathroom kit covers one standard bathtub or shower.Installation Instructions (TDS) Safety Data Sheet (SDS)
• Barefoot Friendly
• Increases Traction
• Fast & Easy Application
• Application Time 10 Minutes
• Not a Coating
• Long-lasting Results
|1 Standard Bathtub or Shower||1||2||4|
|Cost per Sq Ft (Appx.)||$2.33||$2.00||$1.67|
|Volume (ounces)||2 oz||4 oz||8 oz|
• Use in a well-ventilated area
Optional Safety Equipment:
• Wear a long sleeve shirt
• Eye protection
• Nitrile glove (included)
Clean the bathtub/shower using a general household cleaner. Rinse several times with clean water. Use a towel to dry the bathtub completely. If possible, remove drain or protectdrain by adding tapwater to cover it. Avoid extended direct contact with metal surfaces.
Step 1: Pour contents of one bottle onto the bottom of a standard-size bathtub. (Use the second bottle when treatingoversized tubs or showers).
Step 2: Using the scrub pad, spread the product over the bottom of the bathtub or shower. The solution should cover the entire surface.
Step 3: Allow the solution to sit for approximately 4-8 minutes, spreading the liquid to keep the surface wet. Do not allow the solution to dry on the surface.
Step 4: If solution comes in contact with skin, metal or any other surface, wash off immediately.
Step 5: Open the drain, and thoroughlyrinse your bathtub/shower several times and allow to air dry.Enjoy your new slip-resistant bathtub or shower!
For general cleaning and maintenance,use a pH-neutral cleaner and soft bristle brush in a circular scrubbing motion to agitate the surface of your shower or tub.
I applied the product per the directions, needing both bottles for my shower floor. It was very easy to apply and didn't have a bad odor, although I did open a window and put on the bathroom fan for ventilation. Rinsed it well per directions and let it dry. The next day we were very happy with the results. The tiles were no longer slippery at all. Hopefully this lasts, but so far it definitely works as stated.
One question I have is that I always use a squeegee on the floor after showering. Will this create any problems with the results that were achieved?
We went by all the positive reviews before we purchased this product and are happy we did. My husband faces major back surgery and our porcelain tub is super slippery. A bath mat did not give him the traction he needed while showering before and after surgery. We applied this product last night to our tub and wow, we are amazed! It made our feet feel like they are planted in the wet, soapy tub without a rough surface to the touch. I cannot say enough good things about this product. I know my husband will be safe when he showers with this non-slip surface and the grab bars we installed, of course.
Thank you for making something that is so easy to apply, so comfortable to the touch and gives you confidence to stand in a wet tub without the use of adhesive strips or a mat.
This has to be one of the best products I've ever purchased. The bathtub is now not slippery at all even with soapy feet. It took me 10 minutes to do it. No smell, no mess, it's fantastic. I've recommended it to all of my friends.
This is the second time I've purchased this. It works! The first application only lasted me about a year, but it's still worth it to prevent falls in the shower. I wish the bottle was easier to squeeze.
Thank you for taking the time to share your feedback. Team SlipDoctors