Ultra Grip Premium Extra Texture Non-Skid Epoxy Paint
Ultra Grip Premium Extra Texture Non-Skid Epoxy Paint
Ultra Grip Premium Extra Texture Non-Skid Epoxy Paint
Ultra Grip Premium Extra Texture Non-Skid Epoxy Paint
Ultra Grip Premium Extra Texture Non-Skid Epoxy Paint
Ultra Grip Premium Extra Texture Non-Skid Epoxy Paint
Ultra Grip Premium Extra Texture Non-Skid Epoxy Paint
Ultra Grip Premium Extra Texture Non-Skid Epoxy Paint
Ultra Grip Premium Extra Texture Non-Skid Epoxy Paint
Ultra Grip Premium Extra Texture Non-Skid Epoxy Paint
Ultra Grip Premium Extra Texture Non-Skid Epoxy Paint
Ultra Grip Premium Extra Texture Non-Skid Epoxy Paint

Ultra Grip Premium Extra Texture Non-Skid Epoxy Paint

Regular price$230.00

BULK DISCOUNTS AVAILABLE

/
Color
Hardener
  • SlipDoctors Ultra Grip is a two-component, high solids, heavy duty anti-slip epoxy coating designed for industrial and marine applications.
  • Provides unparalleled chemical resistance and increased traction in wet and slippery areas in rugged work environments such as drilling rigs, aircraft carriers, and other extreme situations.
  • Ultra-durable coating that can withstand tough weather conditions and forklift traffic and is resistant to grease, oil, saltwater, alcohol, detergent, and gasoline.
  • Ideal for both interior and exterior applications on concrete, steel, diamond plate metal, ramps, warehouses, marine areas, food processing areas, and many other surfaces.
  • Low temp cure option available for cure in temps as low as 24 F (-4 C).
  • Apply with phenolic roller or squeegee for varied texture finishes.
  • NOTE: Due to DOT regulations, this product can only ship via ground transportation.
  • Phenolic Roller: Appx 30-40 sq ft per Gallon
  • Trowel/Squeegee: Appx 40-50 sq ft per Gallon

SlipDoctors Ultra Grip is the latest and most aggressive anti-skid paint, with the ultra-rough textured gloss finish composed of a two-part epoxy that gives it extraordinary durability. Ultra Grip’s extreme texture makes it suitable for high traffic surface types like steel, diamond plate, wood, ramps, truck beds and more. Ultra Grip’s two-part epoxy composition makes it especially ideal for industries exposed for harsh chemicals environments.  Experience unparalleled resistance and anti-slip safety with Ultra non-skid floor paint available in dark gray, light gray, black, and yellow colors.

The application is simple, and it takes only two hours for the non-skid grip coating to be dry to the touch and then fully cured after 24 hours. You can roll it on with a phenolic roller or apply it using a squeegee if you're aiming for a specific texture. Ultra Grip is a remarkable non-skid paint that boasts top-notch traction levels, making it an impeccable choice for any indoor or outdoor areas that are frequented by vehicles or pedestrians. This non-skid paint ensures maximum safety by providing unparalleled slip-resistance for almost any situation.

Whether it's for commercial or residential use, Ultra Grip guarantees superior traction in any space that demands it. From warehouse floors to outdoor ramps, this paint has got you covered.

NOTES
  • Read product label and Technical Data Sheet thoroughly before application to review safety precautions, surface preparation, and full application instructions.
  • Videos are available to illustrate basic application instructions.
  • Always wear the recommended safety equipment and follow safety precautions.
  • Slight color variations are possible between different lot numbers. We recommend mixing paint from different lot numbers together to achieve consistent color results.
SURFACE PREPARATION
  • Surface preparation varies by surface. Please review the TDS for detailed information.
  • Application Temperatures: 50-120 F (Regular Cure) and 40-80 F (Low Temp Cure).
  • Do not apply until the surface has been properly prepared. If the substrate is not properly prepared, failure of the product to adhere to the substrate may occur.
  • All sealers, chemical contaminants, grease, oil, and other foreign material must be removed.
  • Surfaces must be clean, dry, and structurally sound.
APPLICATION
  • Do not apply over expansion joints. Do not apply if surface temperature is within 5 degrees of dew point.
  • Always apply a test patch for approval prior to application.
  • Mix 4:1 by volume. Mix four parts Base (Part A) to one part Hardener (Part B) with a 400-600 RPM explosion-proof variable speed drill and Jiffy mixer.
  • Both the Base and the Hardener must be agitated separately prior to mixing. Use immediately after mixing. No induction time needed. Thinning is not recommended.
  • POT LIFE @75 F for 60 to 90 Minutes (Regular Cure); 60 Minutes (Low Temp Cure).
  • Applying Ultra Grip with a phenolic roller will produce a uniform ridged surface. Apply with a trowel/squeegee if a smoother surface is desired.
  • Immediately after mixing, pour a ribbon of the mixed material measuring approximately 2-3 feet long and 6 inches wide onto the surface.
  • Phenolic Roller: Pull the material towards you using some pressure. Do not over roll material as this can decrease the anti-slip traction. Roll material only in one direction. Strike off any excessive material buildup on edges from roller nap. The spread rate is approximately 30-40 sq ft per gallon.
  • Trowel/Squeegee: Pour 2-3 feet wide ribbon. Hold trowel/squeegee at 45 degree angle and pull material toward you. Apply an even thickness at a coverage rate of approximately 40-50 sf ft per gallon.
  • CLEAN UP: Clean spills, splatters, tools, and equipment promptly with mineral spirits or paint thinner.

Customer Reviews

Based on 7 reviews
100%
(7)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
M
Mike M.
WORKED BETTER THAN EXPECTED.

VIBRANT COLOR, TOOK A MINUTE TO FIGURE OUT THE RIGHT METHOD FOR THE APPLICATION I WAS USING IT FOR. WISH IT WENT A LITTLE FURTHER THAN WHAT IT DID. WILL BUY IT AGAIN AND AGAIN. COATED PRESS PLATFORM AND A SECTION OF CONCRETE

P
Peter R.
5 star

It is fantastic .
Best to use a drill attachment to mix.
I used a scraper to apply and it is perfect. Took 2 days to dry well and after 3 days fully cured. It attached to existing epoxy floor perfectly.

T
Todd W.
Game Changer

I am owner of a line painting company in Canada, we have been searching for years for a product like yours. i could not be more happy with the results of the application. i would advise, from our experience that squeegie application is far superior & so much easier than that of rolling.
i only wish that one day you find a way to make this product "sprayable" !!

Thank you for taking the time to share your feedback. Team SlipDoctors

R
Roy W.
Trailer steel decking.

I am really happy with the finished results. I replaced three 2x6 wood decking on both sides my gooseneck trailer with steel. I wanted something that wasn't so slippery like paint would be when wet. This product baffled me a bit as thick as it was to start with. I used a paint mixer on my drill to whip the Hardener & Paint. Then mixed the two products together, again ran the paint mixer with drill wide open for at least 2 minutes. Thicker than ever, I poured it into a paint roller pan, using a medium roller, painted it on evenly. First side went great, second side took more rolling paint as it was setting up. I got it done, one of my problems was the temperature was 66 degrees. Says right on can needs to be 75 or higher, I think next time I use it, it'll be in summer outside. Finished product is awesome!!!!

Thank you for purchasing our product and for sharing your experience with us. Team SlipDoctors