Floor Grip - Non-Slip for Vinyl & Wood Flooring

SlipDoctors

  • $135.00


Our exclusive roll-on anti-slip coating is a clear, water-based urethane sealer designed for creating an anti-slip coating on interior wood, vinyl, vinyl composition tile (VCT), cork, laminate, linoleum surfaces, engineered wood, concrete, epoxy floors and more.

Once applied with our proprietary additive and crosslinker (both included), Floor Grip provides a durable high-traction surface that is both scratch and chemical resistant. A great solution for human feet and dog paws to prevent slipping. Floor Grip will dry in 6-12 hours and is good for interior or exterior applications.  Ideal for hospitals, hotels or any facility that requires slip resistance and a lustrous sheen. Available in gloss or matte finish.

Floor Grip Roller - Click here to buy more

Even when wet, your slippery floor’s slip resistance after the non-slip solution will surpass ANSI A137.1, A326.3 or B101.3 standards.

0.51 Wet DCOF - ANSI B101.3
0.53 Wet DCOF – ANSI A137.1 / A326.3
0.67 Wet SCOF - ANSI B101.1

Installation Instructions (TDS) Safety Data Sheet (SDS) Cleaning Instructions
  • Now available in matte or gloss finishes.
  • Ideal for kitchens, living rooms, bathrooms, or any place with wood or VCT floors
  • Additional nap rollers available for purchase here.
  • Bonding agent recommended for laminate floors (sold separately)
  • Coverage: One gallon covers 500 – 600 square feet 
  • Roller Included with Each Gallon (Click here to buy more

 


Gallon 4-Gallon Case
Coverage per Sq Ft 500 2,000
Cost per Sq Ft (Appx.) $0.25 $0.23
⅜” Nap Rollers Included 1 4
Volume (liters) 3.78 15.14

Directions for Preparation, Application and Use

Read entire product label,Technical Data Sheet (TDS)and Safety Data Sheet (SDS)before using.Floor Grip should not be diluted or thinned in anyway.Gloves should always be worn when handling product.

Surface Preparation: All substrates must be clean, dry and free of dust, dirt, oil, grease, soil, soap residue, wax, flaking paint and other soluble contaminants. Do not use alcohol-based cleaners, such as Pine-Sol and Fabuloso. Do not apply if rain is forecast in the next 24 hours, on damp days or when surface temperature is below 40°F(4°C)above 80°F (27°C).

• All waxes and polishes must be completely removed from the surface before application.
• Surfaces must be thoroughly cleaned. *Not required* For increased adhesion by sanding use a maroon pad or320-400 grit sandpaper to lightly scuff the floor.
• Prior to the coating application, remove all dust from floor and surrounding structures. Always protect neighboring surfaces including carpet, metal and other surfaces.
• New floors are ready for coating AFTER the above procedures are completed.

New Installation Application Instructions:

Step 1: TEST SAMPLE: Floor Grip should be tested on flooring surfaces before full application. To prepare test sample, pour a small amount of Floor Grip into a separate container with a small amount of additive, mix well. Apply to a clean inconspicuous area of your floor and allow to dry completely.
Step 2: Floor Grip can be applied in either 2 or 3 coats. Each coat consists of: Floor Grip + Crosslinker + Additive
Step 3: Once ready for full application, determine the number of coats you plan to apply. Prepare solution for each coat separately in a sturdy container. Add the appropriate amount of Crosslinker to the container, dividing it between the containers for each coat. NOTE: Once Crosslinker is added to the FloorGrip, solution must be applied to the floor within 4-6hours. CAUTION! MIX WELL BEFORE APPLYING!
Step 4: Add appropriate amount of additive to solution, depending on number of coats, and mix well. Medium texture is recommended. Read additive bottle label for instructions.
Step 5: Using a 3/8” nap roller, apply Floor Grip in uniform coats at a moderate speed to prevent foaming. For best performance, avoid thick coats, apply second coat at a right angle to the first coat.
Step 6: Clean paint tools with soap and water.

Maintenance:

For general cleaning and maintenance, use a light pressure rinsing. For best results to remove oily deposits or other foreign matter, apply pH-neutral cleaner at recommended dilution rate and scrub lightly with a soft bristle deck brush. Do not use alcohol-based cleaners, such as Pine-Sol or Fabuloso

Customer Reviews

Based on 36 reviews
86%
(31)
14%
(5)
0%
(0)
0%
(0)
0%
(0)
N
N.
Floor Grip

Great Product! Worked just like we hoped. We are using it to add texture to a home Climbing Wall.

D
D.
Anti slip floor finish

Easy to use. Works great. Don't overdo the floor grip additive. Also, it collects at the bottom of the pan so don't pour that onto the floor at the end. You'll get very rough patches.

Thank you for purchasing our product and for sharing your experience with us. Team SlipDoctors

M
M.W.

Floor Grip - Non-Slip for Vinyl & Wood Flooring

Thank you for purchasing our product. Team SlipDoctors

S
S.A.
2nd Time Around, Not Their Fault

We had just got the floors done and then one mine later our kitchen flooded and there went the floors! Got our new floor in, waited a bit to see if the dog could adjust and he was just falling and then tore and ACL. Time for the coating and like a charm, no more slipping dog and it looks fantastic!!

Thank you for taking the time to share your feedback. Team SlipDoctors

R
R.Z.
Fantastic

Excellent product, Thank You SlipDoctor. I was not sure if I sure try this product or not, epically after I read a lot of negative reviews... But, let me tell you that if you follow the directions as written, and you prepare the wooden stairs or flooring properly, this product works like a charm. I am Very Happy that I tried this product on my newly finished stairs, and I would definitely recommend SlipDoctor to my family, my friends, and to everyone.

Thank you for taking the time to share your feedback. Team SlipDoctors


Customers Who Purchased This Item Also Viewed


Sale

Unavailable

Sold Out