Tuff Grip or Tuff Grip Extreme - Aggressive Traction Non-Skid Floor Paint

• SlipDoctors Tuff Grip is a high-performance anti-slip urethane coating that is designed for areas or equipment that require high traction anti-slip protection.
• It is a textured anti-slip industrial paint finish for metal substrates as well as a general floor coating.
• Ideal for use in industrial and heavy-traffic areas. Uses include loading ramps, rooftop walkways, warehouse floors, and more.
• For even greater performance, try SlipDoctors Tuff Grip Extreme Kit that includes a Crosslinker that gives Tuff Grip increased UV protection, greater chemical resistance, faster cure time and increased corrosion resistance.
• Once Tuff Grip Extreme Kit is applied, the product will dry to a hard, durable surface within 4-6 hours.
• One 9 inch textured roller included with each gallon.
• NOTE: Due to DOT regulations, this product can only ship via ground transportation

• Gallon: Up to 50-75 sq. ft.

Tuff Grip is a high-performance non-skid paint coating specifically designed to provide an aggressive and highly textured anti-slip finish on a variety of surface types including metal, concrete, previously painted concrete, and wood. Tuff Grip non-skid urethane paint coating can withstand all weather conditions, Tuff Grip is ideal for use on loading ramps, walkways, warehouse floors, machine-operating areas, factory floors, truck bed liners, galvanized steel, equipment beds, and other surfaces where high-traction non-skid paint coating is needed. Ideal for virtually any indoor or outdoor area.

Tuff Grip non-skid paint solution is available in 10 colors for applications in Black, Dark Brown, Safety Blue, Light Gray, Medium Gray, Safety Yellow, Safety Red, and Sand. Custom anti-slip paint colors can also be produced on request. Minimum order quantities apply.

Tuff Grip Extreme non-skid paint upgrade option offers a grip coating with added benefits above and beyond the regular Tuff Grip such as added UV protection and a quick drying time of 4-6 hours. Tuff Grip Extreme’s durable non-slip paint coating also increases chemical and corrosion resistance.

• Read product label and Technical Data Sheet thoroughly before application to review safety precautions, surface preparation, and full application instructions.
• Videos are available to illustrate basic application instructions.
• Always wear the recommended safety equipment and follow safety precautions.
• Slight color variations are possible between different lot numbers. We recommend mixing paint from different lot numbers together to achieve consistent color results.

• Surface preparation varies by surface. Please review the TDS for detailed information.
• Test product in an inconspicuous area before full application to determine dry time and back rolling texture.
• Surface, air, and product temperature must be 40 F (4 C) and at least 5 F (-15 C) above dew point.
• All substrates must be clean, dry, and free of dust, dirt, oil, grease, soil, soap residue, wax, flaking paint, and other soluble contaminants.

• Stir or use hand drill mixer to thoroughly mix before applying. Mix occasionally during application.
• Two light coats are recommended rather than one thick coat.
• Apply by rolling using the included roller.
• Allow the first coat to dry for approximately 15 minutes. Then, back roll with light even pressure to create high-traction peaks.
• Recoat following the same procedure.
• If applying two coats, a new roller may be needed for the second coat

• Use a hand drill mixer to thoroughly mix Tuff Grip. Pour into a separate container. Add Crosslinker and mix well using a hand drill mixer. The mix ratio of Tuff Grip to Crosslinker is 8:1. Mixed material will have a pot life of 30-90 minutes. Mix occasionally during application.
• Two light coats are recommended rather than one thick coat.
• Apply by rolling using the included black roller.
• Allow the first coat to dry for approximately 15 minutes. Then, back roll with light even pressure to create high-traction peaks.
• When applying, be aware of the quick dry time.
• If applying two coats, a new roller may be needed for the second coat.

• CLEAN UP: Clean spills, splatters, tools, and equipment promptly with mineral spirits or paint thinner.
• Use a pH-neutral degreaser and deck brush or power wash to clean using low to medium pressure.
• Wait at least 7 days after application to power wash.