Shower Grip White Anti-Slip Paint Coating for Bathtubs & Showers

• SlipDoctors SHOWER GRIP WHITE is a water-based acrylic coating designed to provide anti-slip protection on bathtubs and shower surfaces.
• Shower Grip White is durable, chemical resistant, and provides increased traction in wet areas.
• Ideal for use on fiberglass and acrylic bathtubs and showers.
• Once fully cured for 72 hours, Shower Grip can be submerged underwater, making it ideal for use in spas, hot tubs, steps, and more!
• Shower Grip’s white finish can help fix bathtub discolorations, making your shower look new again.
• This versatile kit includes a nap roller and paint tray for easy application.
• Shower Grip White provides a white, semi-gloss finish to enhance the appearance of your tub or shower.
• Not for use to paint the tub or shower walls or for use outside the bath area.

• Up to two standard size bathtubs or showers.

Shower Grip non-slip bathtub paint is the ideal anti-slip solution to drastically increase the slip resistance of baths, shower trays, and other bathroom surfaces. It is a white anti-slip tub paint that can be applied easily using a roller.

It can be used when you refinish bathtubs or showers or simply want to increase the slip resistance in your bathroom. It is a textured white tub paint that uses barefoot-friendly anti-slip granules to provide enhanced footing when you use your bathtub or shower.

It is suitable for use on steel, enamel, acrylic, marble, cast iron, fiberglass, porcelain, and other traditional bathroom surfaces. This non-slip shower floor and tub coating can be applied with a roller.

• Read product label and Technical Data Sheet (TDS) thoroughly before application to review safety precautions, surface preparation, and full application instructions.
• Videos are available to illustrate basic application instructions.
• Always wear the recommended safety equipment and follow safety precautions.

• Fill and patch any chipped areas before application.
• Lightly sand surface with 220 grit sandpaper. Rinse thoroughly and allow to dry.
• Surface must be clean, dry, and free from contaminants before application.
• If desired, use painter’s tape to mark off application area. Use caution when using tape on previously painted surfaces.

• Always test Shower Grip on surface to determine suitability before full application.
• Shower Grip White should not be diluted or thinned.
• Stir Shower Grip thoroughly using the included stir stick for even Additive distribution. Stir frequently during application.