Stone Grip - Non-Slip Tile TreatmentS-TR-SGINDQT
Our best seller! Stone Grip Non-Slip Tile Treatment for Porcelain Tiles, Ceramic Tiles & Stone Floors. Stone Grip anti-slip tile and stone floor treatment will dramatically increase traction and improve safety on slippery floors even when wet. The slip resistance will surpass guidelines recommended by ADA/ANSI for floor safety, work best in wet barefoot or shoe conditions.
Stone Grip is an easy to apply slip solution with a sprayer, microfiber T-mop or Stone Grip Applicator. Follow the instructions to clean and dry the floor, apply the anti-slip grip treatment and rinse it off. Stone Grip anti-slip coating creates microscopic treads to increase traction on tiles, concrete and stone floors in minutes.
APPLICATOR of Stone Grip (Click here to buy) - $12
Even when wet, your slippery floor’s slip resistance after the non-slip solution will surpass ANSI A137.1, A326.3 or B101.3 standards.
0.59* Wet DCOF - ANSI B101.3
0.63* Wet DCOF – ANSI A137.1 / A326.3
0.72* Wet SCOF - ANSI B101.1
Testing was performed at SlipDoctors office using a BOT-3000E. Please contact us for detailed test results. Actual results may vary.
Stone Grip is ideal for any indoor or outdoor situations for use on all porcelain, stone or ceramic surfaces with no change in appearance. Very effective for submerged or underwater flooring, like pool steps and hot tubs.
Have questions about this product? Be sure to view the FAQsInstallation Instructions (TDS) Safety Data Sheet (SDS)
HOW IT WORKS: Stone Grip anti-slip tile and stone floor application works with the minerals in the natural flooring surface to microscopically transform the surface by creating micro-treads that increase traction. After treatment of the anti-slip coating, these micro-treads create more “grip” on tile or concrete that helps prevent slips and falls…especially on wet surfaces…with little or no change the appearance. Perfect for indoor and outdoor use. Available in quart (treats up to 100 sq. ft) and gallon (treats up to 400 sq. ft).
SIMPLE & EFFECTIVE: Stone Grip's anti-slip has no odor and requires minimal surface prep prior to the treatment. Ideal for any indoor or outdoor area. Read and follow label instructions carefully. Clean and dry the slippery floor, perform a test on your tile to determine treatment time, apply Stone Grip's non-slip liquid using a microfiber T-mop or garden tank sprayer, neutralize with a mixture of baking soda & water (or plenty of water), rinse and that’s it! No dry time…Stone Grip anti-slip grip makes your surface ready for immediate use! Typical treatment time is 5-15 minutes.
ON-GOING MAINTENANCE: The best way of preventing slips and retaining slip resistance after the Stone Grip application is a strong maintenance plan. Find out how SlipDoctors recommends cleaning the flooring once the Stone Grip non-slip treatment has been applied.
|Coverage per Sq Ft||75||400||1,600|
|Cost per Sq Ft (Appx.)||$0.60||$0.21||$0.20|
• 2 Buckets or 2 small tank sprayers
• Microfiber T-mop (Do not use string mop head) or Stone Grip Applicator
• Rubber-soled shoe for testing the floors before, during and after treatment
• Baking soda is required for neutralizer(preparation directions below)
• Wet/Dry vacuum or Squeegee(optional)
REQUIRED SAFETY EQUIPMENT:
• Chemical-resistant gloves must be worn at all times
• Clothing to cover all skin areas
• Eye protection
• Rubber boots
• Mask (optional)
NOTE: Avoid solution contact with all metal and glass surfaces. If possible, remove these items temporarily from the area to be treated; or use waterproof duct tape or plastic to fully cover these surfaces. Use special precaution with drain covers in a shower, bathtub or wet area. When opening the container, keep the opened container on the surface that is to be treated in case of a spill. Do not set bottle on countertops. Always use towels on ground to avoid spills.
Step 1: Prepare the Neutralizer: Fill a bucket or small tank sprayer with clean tap water. Add one or two tablespoons of baking soda per gallon of water and mix well. Set aside to use if needed.
Step 2: Surface Preparation: Thoroughly clean the surface to be treated prior to treatment using a pH-neutral or slightly acidic cleaner. For new floors, make sure all grout residues are removed from the tiles. The floor may need to be rinsed multiple times to remove all former cleaning products.
PERFORM TEST - ALWAYS TEST PRODUCT ON FLOORS FIRST
Step 1: Sample Testing: Before initial treatment, test on one tile in an inconspicuous area of your floor. Thoroughly clean and dry the test tile. Spread a small amount of the solution completely over the test tile and note the time. Every 30 seconds, use a rubber-soled shoe to apply downward pressure and try to slide the shoe along the treated surface. DO NOT LET STONE GRIP DRY ON THE SURFACE. When you feel you have achieved the level of slip resistance you desire, rinse the test tile with the prepared neutralizer. Make note of the total amount of time you left the solution on the tile. Typically, this time will be between 5-15 minutes. This is not a case where longer treatment time is better. It is important not to over-treat the surface. As soon as there is a reasonable resistance to the pressure of the shoe, you should apply the neutralizer. You can perform multiple tests if you are unsure of the initial test results.
Step 2: Review Test Results: Once you have achieved an acceptable level of slip resistance and applied the neutralizer, thoroughly rinse and dry the test tile and inspect it carefully to determine if there is any visible change in appearance.
If there is a visible change, you can perform another test on a different untreated tile and reduce the treatment time. Continue the testing process as before and inspect the new results. Once you are satisfied with the test results, you are ready to treat the remaining floor area. If you are unable to determine the correct treatment time for your flooring, please contact SlipDoctors Technical Support for assistance.
Step 1: Apply to Remaining Floor Area: Spread Stone Grip using a tank sprayer or bucket and applicator on an area ONLY as large as can be covered and subsequently neutralized consistent with the treatment time determined by the testing process. Do not let Stone Grip dry on the surface. Do not pour directly on the surface. It may be necessary to divide large areas into smaller sections for effective application. After the section has been treated for the amount of time determined in the testing process, apply the neutralizer. Repeat the process for all sections until the entire floor has been treated. Thoroughly rinse the entire treated area with clean water and dry with wet vacuum or squeegee.
To maintain your slip-resistant surface, keep the surface clean and free from oil, grease and other contaminants by cleaning with an effective cleaner/degreaser, scrubbing with a deck brush to help remove build-up and rinsing thoroughly with clean water. We recommend using our Maintain Grip product to thoroughly clean the surface, remove grease build-up and renew the non-slip traction created by Stone Grip treatment. Maintain Grip can be purchased by calling us at 1-888-436-5404 or by visiting our website www.slipdoctors.com.
IMPORTANT: Before using, buyer shall determine the suitability of the product for the intended use, and the user assumes all risk and liability whatsoever in connection therewith. No statement or recommendation not contained herein shall have any force or effect unless in an agreement signed by seller and manufacturer. Buyer assumes all risks and all responsibility associated with use and disposal. SlipDoctors cannot eliminate all possibilities of slip-and-fall accidents. Actual results will vary.
We used Stone Grip on our shower floor which had large format tiles that got slippery from soap and shampoo. We were hesitant to try Stone Grip but it was our last attempt before replacing the tiles. WOW, are we glad we did. Our shower floor is no longer a slip hazard, and the tiles look the same as when we started. We would recommend using the Stone Grip applicator which we found to work the best at spreading an even coat. Great product and easy to use.
Thank you for taking the time to review our product. Team SlipDoctors
Applied it as directed to a stone tile floored shower. Works great- feels like a thin transparent layer of rubber on the floor. Appearance is the same as before, but no no slip-n-slide.
Thank you for purchasing our product and for sharing your experience with us. Team SlipDoctors
I had medium to high hopes for this product mostly because it offered exactly what I was looking for in my ceramic tile shower. The application instructions were clear but not realistic (how do you keep testing every 30 second rubbing a shoe on the test tile & keep the surface damp?).
Anyway, I just gave the tiles 10 minutes set time & prayed.
The next day when I took my shower - Boy was I impressed. The surface was no longer slick & no decolorization of the tiles.
Just wondering how long this new surface lasts?
All SlipDoctors coatings and treatments are covered by a 2-year manufacturer's warranty and are expected to last up to 2 years. Thank you for taking the time to review our product. Team SlipDoctors
Just remodeled my new bathroom and I was looking for any kind of solution for slippery tiles. I went through different flooring coverings and other “paint related products”. Yes, Stone Grip is pricey but absolutely worth every penny! Fantastic product - totally transparent, invisible on my floor tiles and works perfectly! Don’t make mistake and try less expensive - you will end up with this one if you looking for truthfully non-slipping coating. Thank you Stone Grip!
Thank you for taking the time to share your feedback. Team SlipDoctors
Customers Who Purchased This Item Also Viewed
Tuff Grip or Tuff Grip Extreme - Aggressive Traction Non-Skid Floor Paint