Bathtub Kit Anti-Slip for Porcelain & Ceramic



  • $35.00

Bathtub Kit for Porcelain or Ceramic Tubs & Showers. The CDC estimates that about two-thirds of accidental injuries happen in the bathtub or shower. Don’t wait for you, your family or your residents to be a statistic! We have developed an exclusive treatment specifically for your bathroom, including both bathtubs and showers.

The SlipDoctors Bathtub and Shower Treatment Kit is the perfect solution to treat porcelain or ceramic bathtubs and showers. The treatment is easy, and only takes about 10 minutes. After one simple treatment, you can relax knowing your shower and bathtub are slip-resistant. The Kit is specially formulated to interact with the minerals in porcelain and ceramic surfaces to increase surface traction. Our products are carefully formulated to achieve the desired results without changing the appearance of the surface.

Quart container will treat about 25 standard size bathtubs.  Kit includes measurement bottles, scouring pads, gloves.

Even when wet, your slippery floor’s slip resistance after the non-slip solution will surpass ANSI A137.1, A326.3 or B101.3 standards.

0.63 Wet DCOF - ANSI B101.3
0.65 Wet DCOF – ANSI A137.1 / A326.3
0.72 Wet SCOF - ANSI B101.1

One bathroom kit covers one standard bathtub or shower. 

Installation Instructions (TDS) Safety Data Sheet (SDS)

Special Features

• Barefoot Friendly

• Increases Traction

• Fast & Easy Application

• Application Time 10 Minutes

• Not a Coating

• Long-lasting Results

Kit 2-Pack 4-Pack
1 Standard Bathub or Shower 1 2 4
Cost per Sq Ft (Appx.) $2.33 $2.00 $1.67
Volume (ounces) 2 oz 4 oz 8 oz

Safety Precautions:
• Use in a well-ventilated area

Optional Safety Equipment:
• Wear a long sleeve shirt
• Eye protection
• Nitrile glove (included)

Surface Preparation:
Clean the bathtub/shower using a general household cleaner. Rinse several times with clean water. Use a towel to dry the bathtub completely. If possible, remove drain or protectdrain by adding tapwater to cover it. Avoid extended direct contact with metal surfaces.

Application Instructions:

Step 1: Pour contents of one bottle onto the bottom of a standard-size bathtub. (Use the second bottle when treatingoversized tubs or showers).
Step 2: Using the scrub pad, spread the product over the bottom of the bathtub or shower. The solution should cover the entire surface.
Step 3: Allow the solution to sit for approximately 4-8 minutes, spreading the liquid to keep the surface wet. Do not allow the solution to dry on the surface.
Step 4: If solution comes in contact with skin, metal or any other surface, wash off immediately.
Step 5: Open the drain, and thoroughlyrinse your bathtub/shower several times and allow to air dry.Enjoy your new slip-resistant bathtub or shower!

For general cleaning and maintenance,use a pH-neutral cleaner and soft bristle brush in a circular scrubbing motion to agitate the surface of your shower or tub.

Customer Reviews

Based on 84 reviews
Edward W.

great result

Thank you for purchasing our product. Team SlipDoctors

Suzie S.
Perfect Solution to Slippery Bathtub!

No more rubber mats that eventually slip, too. This product makes the bottom of the tub into a place where your feet just sort of "stick" to the surface. Easy to use, too. Slippery bathtub becomes safe in 10 minutes!

Thank you for taking the time to share your feedback. Team SlipDoctors

Marina F.
Works as promised on my ceramic tubs!

Excellent product and delivers on its promises. I have no slipping issues in our tubs at all. I even put a little on the upper side where you would put your hand to stand up - perfect. Only side note - please roll it on extremely slowly. Pay attention that you are not creating tiny little bubbles as you roll across whatever surface you are putting it on.
What I truly like is that it does not change the composition of your ceramic like some other products will. Although a reapp has to be done every couple of years...I would much rather that than have my ceramic tubs have micro abrasions like other products do.
It does NOT smell - not even while drying. It is really a great product. Will be ordering again in a couple of years for a re-apply.

Thank you for taking the time to share your feedback. Team SlipDoctors

Randy T.

Bathtub Kit Anti-Slip for Porcelain & Ceramic

Thank you for taking the time to share your feedback. Team SlipDoctors

Customers Who Purchased This Item Also Viewed



Sold Out