Bonding Agent



  • $15.00

Our bonding agent is exclusively designed to maximize the adhesion of coatings and paints on hard-to-coat surfaces and those with an increased risk of peeling or chipping. When mixed into the first coating batch, this bond adhesion promoter is recommended for increasing the functional life, corrosion resistance, appearance and sealer qualities of SlipDoctors’ products.

This product can be used in oil-modified urethanes, waterborne urethanes, moisture-cure urethanes, acid-cure coatings, UV curable coatings, epoxies, acrylic sealers, stains and paints. It is designed to increase the life and function of coatings and to reduce any bonding and adhesion problems. It can be used when overcoating previously sealed or coated surfaces, floors that cannot be sanded or etched, and floors that have a questionable level of coating failure risk.

Our bonding agent can be used with most coatings for adhesion on metal and granite surfaces, high-sheen porcelain, terrazzo, composite decking, concrete, and other surfaces that are hard, smooth, polished or glossy. It will not alter the colour or sheen of coatings.

Have questions about our bonding agent product? Talk to our team.

Safety Precautions:
- Avoid contact with eyes and inhalation of vapors.
- Immediately wash off the product with soap and water if it comes in contact with skin.
- Use the product in a well-ventilated area.
- Keep away from heat, sparks and flames.
- If you scrape, sand or remove old paint from any surface, you may release lead dust.


LEAD IS TOXIC. Contact a professional company to assist.

Optional Safety Equipment:

- Chemical-resistant gloves
- Clothing to cover all skin areas
- Eye protection

Surface Preparation:

Use the surface preparations listed for the base coating product (surface should generally be clean and dry). Also, use the application and dry times listed by the product being used.

Step 1
Mix two ounces bond adhesion promoter per gallon of coating product. Stir in gently until thoroughly blended.

Step 2
Pour product into application tray and apply according to base coatings recommendations.

Step 3
Allow first coat to dry according to recommendations of the base product. Save excess leftover product and re-stir before using on a second coat if done within 48 hours of original mixing.


For general cleaning and maintenance, use a light pressure rinsing. For best results to remove oily deposits or other foreign matter, apply pH-neutral cleaner at recommended dilution rate and scrub lightly with a soft bristle deck brush.

Be sure to download the full instruction guide and safety data sheet from this page.


Installation Instructions (TDS) Safety Data Sheet (SDS)

Customer Reviews

Based on 55 reviews
Steven G.
The Bonding Agent Works

II tried a general high quality outdoor paint previously and it did not adhere or hold up on my patio. I added the bonding agent to the primary and realized as I started to brush out the trim that the adherence is far superior to what I am used to. I also left a review for the paint, which seems excellent as well.

Thank you for taking the time to share your feedback. Team SlipDoctors

Charles R.
Extra Grip Non-Skid Additive for Colored Paint

Installed on the concrete floor signage for forklift traffic to not go past this point.
time will tell if the product last.

Thank you for purchasing our product and for sharing your experience with us. Team SlipDoctors

Brad B.
Worked fine

It worked fine . Everything went as Expected.

Thank you for purchasing our product. Team SlipDoctors

Penny R.

Bonding Agent

Thank you for taking the time to review our product. Team SlipDoctors

Customers Who Purchased This Item Also Viewed



Sold Out