Polish Grip – Polished Marble & Granite Anti-Slip Penetrating Sealer
- SlipDoctors Polish Grip is a professional-grade penetrating sealer designed to provide anti-slip protection on unsealed natural stone, polished porcelain tile, marble, granite, concrete and other surfaces.
- This easy-to-apply treatment forms an invisible barrier that increases traction and improves resistance to spills and stains.
- Once applied, the lustrous natural shine remains unchanged. For use on interior and exterior surfaces. Applicator included with gallon. Applicator available for purchase with the pint.
- NOTE: Due to DOT regulations, this product can only ship via ground transportation.
- Pint: Up to 300 sq. ft.
- Gallon: Up to 2,400 sq. ft.
Polish Grip is a professional-grade penetrating sealer designed to provide anti-slip protection on unsealed natural stone, polished porcelain tile, polished marble, polished granite, concrete and other surfaces. This easy-to-use treatment can be applied with a clean white towel, microfiber towel, paint roller/brush or Polish Grip Applicator.
Once applied, it forms an invisible barrier that creates surface tension, increasing traction and improving resistance to spills and stains. The lustrous natural shine of your highly polished surface and grout remains unchanged. Polish Grip provides a more durable surface with effective anti-slip protection. For use on interior and exterior surfaces including grout.
NOTES
- Read product label and Technical Data Sheet (TDS) thoroughly before application to review safety precautions, surface preparation, and full application instructions.
- Videos are available to illustrate basic application instructions.
- Always wear the recommended safety equipment and follow safety precautions.
- Clean surface thoroughly with pH-neutral cleaner.
- Surface must be clean and dry before application.
- Do not apply if it has rained in the last few days or if humidity level is high.
- Protect exposed surfaces including wood, carpet, metal, and landscaping.
- Due to variations in substrates, perform a sample test to ensure maximum performance and suitability for the intended use. Test product in an inconspicuous area and allow to fully cure to test results.
- Do not thin or dilute. Apply Polish Grip evenly to surface until damp using a clean white towel, microfiber towel, or Polish Grip Applicator. Leave on surface for 3-5 minutes for maximum penetration.
- Remove excess product using a new clean white towel, microfiber towel, or carpet bonnet before product dries.
- Any excess residue that dries on the surface can be removed by re-applying a small amount of Polish Grip and immediately wiping off excess while wet. If a second application is desired, wait at least one hour before applying.
- Polish will fully cure in 24-72 hours, depending on conditions.
- CLEAN UP: Dispose of all application materials in accordance with local regulations. Do not wash or reuse.
- For general cleaning, use a pH-neutral cleaner and a soft mop or use low-pressure rinsing. Avoid scrubbing.
- The use of buffing machines is not recommended.
